Futaba 6K 2.4GHz V3S FHSS/T-FHSS Radio System (Heli)

The Futaba 6K 2.4GHz V3S FHSS/T-FHSS Radio System is one of the most feature packed transmitters in its price range. Featuring telemetry sensors to monitor critical flight data, S.Bus and S.Bus2 servo compatibility, with setting functions that can be programmed directly from the transmitter. Ergonomic controls are within easy reach, and the menu navigation is simple. The updated 6K V3S model allows for the user to adjust the governor speed settings through the transmitter using channel 7. More functions for gliders such as, wing type 2AIL-B, trim mixing for rudder and more conditions have been added. When you consider other features like four 3-position switches, 30 model memory, a backlit 128x64 DOT LCD screen and updateable software, it's easy to see why the 6K V3S is a lot of radio for the money.

The R3008SB receiver can use S.Bus as the main link/communication to the servos or a combination of S.Bus and the conventional outputs together. It features 8 standard PWM outputs in addition to S.Bus and S.Bus-2 outputs. Features bi-directional communication with a T-FHSS Air Futaba transmitter using the S.BUS2 port. Using the S.BUS2 port will allow for an impressive array of telemetry sensors to be used.

NOTE: Model data from the 6K V3S cannot be transferred to older 6K models, however, model data from older 6K models may be transferred to the 6K V3S.

System Features:
S-FHSS/T-FHSS selectable
Telemetry system (T-FHSS) with data speech function for monitoring receiver battery voltage, external voltage, temperature, RPM, altitude and variometer
Built-in antenna
S.Bus/S.Bus2 servo setting functions programmable through the transmitter
Preset vibration alarms
30 model memory
Programmable mixes for airplanes, helicopters, gliders and multi-rotors
Digital trims with variable step settings
Adjustable stick length and tension
Changeable switch/VR position and AUX channel function
Throttle position warning
Backlit 128x64 DOT LCD screen with adjustable display contrast
Software updateable through the CIU-2
Screen Lock
Earphone/S.Bus/Trainer jacks
Assignable switches (four 3-position)
Range Check
Program navigation bay with jog dial, +/- pads and end pad
Data reset
Model copy
Selectable model type
Fail Safe
End Points
Trim/Trim Resets/Trim Steps
Sub Trim
Servo Reversing
Parameter functions
Servo monitor/Test
Wireless model data transfer
Two Timer-Systems (Up/Down)
Trainer system
Helicopter Functions:
Swash type (6)
Condition Select
Throttle Cut
Dual Rate/Expo
Trim Offset
Delay
Governor speed adjustments
Gyro mixing
Swash AFR
Swash mixing
Throttle Curve (5-point)
Pitch Curve (5-point)
Pitch-to-Rudder mixing
Throttle Hold
Hovering throttle
Hovering pitch
Smooth throttle stick motion
Specifications:
Transmitter:
Frequency: 2.4GHz
Type: 2-stick, 6-channel, T-FHSS/S-FHSS selectable
Power Supply: Optional 6V Nimh's or 6.6V Lithium (LiFe) batteries
RF Power Output: 100mW
R3008SB Receiver:
Model: R3008SB 2.4GHz T-FHSS + S.Bus
Type: Full-range flight receiver
Modes: T-FHSS
Features: bi-directional communication with a T-FHSS transmitter to utilize an array of telemetry sensors, S.Bus and S.Bus2 ports, along with 8 standard PWM outputs
Voltage Input: 4.8V-7.4V
Dimensions: 0.98x1.86x0.56" (24.9x47.3x14.3mm)
Weight: 0.36oz (10.1g)
Stock #: FUT01102204-3